Automotive Transfer Press Line
Scope: A large automotive manufacturer wants to reduce the noise level
from their press line 1 A to below 85 dBA for the job function Time Weighted
Average (TWA). Press line 1A consists of 4 transfer presses in sequence stamping
a variety of automotive parts. As you can imagine, each press requires access
to load dies. Access to the line between each press is different.
(Learn More)
|
Automotive Engine Test Cell
Scope: Another automotive manufacturer needed to reduce the background
noise around and engine test cell. Access to the area at multiple points and
ventilation were critical to the success of this project. The noise level
inside the enclosure was reduced to 45 dBA.
(Learn More)
|
Glass Furnace
Scope: Reduce the noise below an 85 dBA job function TWA for the operators
of a large glass furnace. To reduce cost of both the enclosure and the installation,
metal panels were used for noise reduction at the ground level for durability and
curtains were used above the metal panels to reduce noise but also reduce cost.
(Learn More)
|
Test Chamber
Scope: Provide an area on the manufacturing floor where assemblies can be
quickly checked for noise levels. To do this, the background noise must be reduced
from 85 dBA to 40 dBA inside the unit, again, while providing easy access.
(Learn More)
|
