| |
|
|
|
IES
2000’s Industrial Pipe and Duct Lag
Series is designed to offer
significant reduction of radiated
noise, consists of a loaded vinyl
noise barrier with a scrim
reinforced aluminum foil facing on
one side. Industrial Pipe and Duct
Wraps are mass loaded noise barriers
with a reinforced foil facing on one
side that allows for installation of
matching lag tape. Pipe & Duct Wrap
Lag is available with a 1” or 2”
quilted fiberglass decoupler.
Standard rolls are 4’ wide x 30’
long. Typically used to wrap noisy
pipes and ducts to block the noise
that transmits through the walls or
the pipe or duct as air or other
contents move through it as well as
to increase the sound absorption in
the cavity. It also provides sound
absorption and thermal insulation
around the pipe or ductwork. The 2”
thick quilted fiberglass absorber
improves low frequency acoustical
performance. Use to wrap noisy
pipes, ducts, valves and fan
housing. |
| |
|
|
Features: |
Common Uses: |
-
Up to 20 decibel
reduction
-
STC ratings to 34
-
Easy to cut and install
-
Accepts matching Lag
Tape
-
Quilted fiberglass
couplers available
-
Also available in fiber
free.
|
-
Noisy iron, steel, and
plastic pipe
-
Ducts
-
VAV units
-
Heat exchangers
-
Fans
-
Mechanical room
|
|
|
|
 |
1B Lag
A flexible one pound per square foot reinforced foil faced loaded vinyl noise barrier used to wrap noisy pipes, ducts, valves and fans housings. Typically used to wrap noisy pipes and ducts to block the noise that transmits through the walls of the pipe or duct as air or other contents move through it... <MORE> |
|
|
 |
2B Lag
A flexible two pound per square foot reinforced Mylar faced loaded vinyl noise barrier used to wrap noisy pipes, ducts, valves and fans housings. Typically used to wrap noisy pipes and ducts to block the noise that transmits through the walls of the pipe or duct as air or other contents move through it... <MORE> |
|
|
 |
1B Lag/QA-3
A composite material featuring a flexible one pound per square foot reinforced-foil faced loaded vinyl noise barrier bonded to a 1” thick quilted fiberglass sound absorber. Used to wrap noisy pipes, ducts... <MORE>
1B Lag/QA-9
IES - 2000’s 1B Lag/QA-9 is a composite material featuring a flexible one-pound per square foot reinforced-foil faced loaded vinyl noise barrier bonded to a 2” thick scrim faced quilted sound absorber/decoupler... <MORE> |
|
 |
2B Lag/QA-3
A composite material featuring a flexible two-pound per square foot reinforced
foil-faced faced loaded vinyl noise barrier bonded to a 1” thick quilted fiberglass sound absorber. Used to wrap noisy pipes... <MORE>
2B Lag/QA-9
IES - 2000’s 2B Lag/QA-9 is a composite material featuring a flexible two pound per square foot reinforced-foil faced loaded vinyl noise barrier bonded to a 2” thick quilted fiberglass decoupler/sound absorber. Used to wrap noisy pipes, ducts, valves and fan housings... <MORE> |
| |
|
| |
|
